Mounted Flap Wheel 2"
(Pack of
6.0)
• Epoxy center construction holds stem and each flap securely in place
• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Flap Band 3-1/2"
Couldn't load pickup availability
Interleafed Flap Wheel 3 x 1"
Couldn't load pickup availability
Mounted Flap Wheel 1"
Couldn't load pickup availability
Broken Bolt Power Extractor 3/8"
Couldn't load pickup availability
Broken Bolt Power Extractor 5/16"
Couldn't load pickup availability
Micro Screw Power Extractor 1/4"
Couldn't load pickup availability
Mounted Flap Wheel 2"
Couldn't load pickup availability
Mounted Flap Wheel 1"
Couldn't load pickup availability
Mounted Flap Wheel 1"
Couldn't load pickup availability
Hood and Trunk Molding Retaining Clip Nylon Black
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
Couldn't load pickup availability
C-36 Chain Wrench
Couldn't load pickup availability
Hex Key, Fractional, Long Arm, 1/16"
Couldn't load pickup availability
Hex Key, Fractional, Short Arm, 3/4"
Couldn't load pickup availability
Product Description
• Epoxy center construction holds stem and each flap securely in place• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 92019M06 |
|---|---|
| Type | Flap Wheels |
| Diameter | 2 " |
| Width | 1 " |
| Arbor Size | 1/4 " |
| Grit | 60 |
| Maximum RPM | 25,000 RPM |
| Grain | Aluminum Oxide |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191509 |
| TAA Compliant: | No |
| Weight: | 0.57 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
