Flap Band 3-1/2"
(Pack of
1.0)
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.
• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog Page#: 3-19
Frequently Bought Together
Interleafed Flap Wheel 3 x 1"
Couldn't load pickup availability
Mounted Flap Wheel 1"
Couldn't load pickup availability
Slasher 2000 Ceramic Aluminum Oxide Grinding Wheel 4" x 3/16" x 3/8"
Couldn't load pickup availability
Broken Bolt Power Extractor 3/8"
Couldn't load pickup availability
Broken Bolt Power Extractor 5/16"
Couldn't load pickup availability
Micro Screw Power Extractor 1/4"
Couldn't load pickup availability
Mounted Flap Wheel 2"
Couldn't load pickup availability
Mounted Flap Wheel 1"
Couldn't load pickup availability
Mounted Flap Wheel 1"
Couldn't load pickup availability
Air Dam and Grille Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Trim Panel Retainer Nylon 13mm
Couldn't load pickup availability
Split Rivet Aluminum for Bumper 5/32"
Couldn't load pickup availability
836 Alum Pipe Wrench
Couldn't load pickup availability
C-36 Chain Wrench
Couldn't load pickup availability
Hex Key, Fractional, Long Arm, 1/16"
Couldn't load pickup availability
Product Description
Multiple flaps of high-quality abrasive cloth layered onto a circular base. This design significantly increases the amount of material being used, for longer flap band life. The overlapping flaps and zirconium grain grind cooler. As the flaps wear away, fresh grain is exposed, resulting in a constant rate of stock removal and consistent scratch pattern throughout the life of the product.• Zirconium grain
• One-step grinding and finishing
• Very aggressive stock removal
• For use on a die grinder
Applications:
• Finishing weld seams
• Deburring
• Rust and scale removal
• Grinding at 90° angle
• Blending irregular shapes and inside radii
NOTE: Rubber drum is required.
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 28107 |
|---|---|
| Type | Flap Band |
| Diameter | 3-1/2 " |
| Width | 1-3/16 " |
| Grit | 40 |
| Maximum RPM | 7,600 |
| Grain | Zirconium |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191507 |
| TAA Compliant: | Yes |
| Weight: | 0.13 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
