Mounted Flap Wheel 1"
(Pack of
6.0)
• Epoxy center construction holds stem and each flap securely in place
• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Premium Grinding Wheel 7"
Couldn't load pickup availability
Partsmaster Brand Mini Grinding Disk 2' x 5/32' x 3/8" Arbor Coarse Gr
Couldn't load pickup availability
Premium Grinding Wheel 7"
Couldn't load pickup availability
Damaged Screw Remover Extractor Kit 2Pcs
Couldn't load pickup availability
Universal External Thread Repair 11/16 to 1-1/2"
Couldn't load pickup availability
Universal External Thread Repair 5/32 to 11/16"
Couldn't load pickup availability
Mounted Flap Wheel 2"
Couldn't load pickup availability
3" Dia. x 1" Wide Flap Wheel 80 Grit, 1/4" Shank Dia.
Couldn't load pickup availability
Flap Band 2-1/2"
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Blue 17mm
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
Couldn't load pickup availability
Chuck, Quick Change, 1/4 Hex"
Couldn't load pickup availability
7/32˝ x 6˝ Snap-Ring Tool Holder
Couldn't load pickup availability
6-1/2" 1000 Volt Insulation Cable Cutter
Couldn't load pickup availability
Product Description
• Epoxy center construction holds stem and each flap securely in place• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 92016M06 |
|---|---|
| Type | Flap Wheels |
| Diameter | 1 " |
| Width | 1 " |
| Arbor Size | 1/4 " |
| Grit | 60 |
| Maximum RPM | 30,000 RPM |
| Grain | Aluminum Oxide |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191509 |
| TAA Compliant: | No |
| Weight: | 0.36 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
