Wire Thread Insert Repair Kit M18-2.5
(Pack of
1.0)
• Helically-wound thread repair – universally accepted and most cost-effective method of thread repair
• Manufactured from precision cold-formed 18-8 (Type 304) stainless steel
• Kits contain tap, inserts, installation tool, tang removal tool (select kits) and instructions, packaged in a sturdy and convenient storage box
• Inserts compensate for pitch and angle errors and share the load over more of the thread for stronger assemblies
• Tensile strength of at least 200,000 PSI
• Wide effective temperature range: –275°F to +774°F (–170°C to +412°C)
Fix-A-Thred® Insert Installation Instructions
Drill to clear out the damaged thread (if necessary).
Thread insert tap supplied. Tap thread should match up with bolt.
Wind insert in with light downward pressure until 1/4 to 1/2 turn below surface, driving tang towards bottom of the hole.
Remove tool and sit back on top of tang. Tap down sharply. Do not try to twist tang off. For large fine threads, use long nose pliers and pull tang out.
To insure proper installation of inserts, always use the correct and corresponding tools.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Rethreading Die 1/2-13
Couldn't load pickup availability
Universal Internal Thread Repair 1-1/4 to 2-1/8"
Couldn't load pickup availability
Universal External Thread Repair 1-3/8 to 6"
Couldn't load pickup availability
Locknuts for Bulkhead Fittings 725924605
Couldn't load pickup availability
Tube Sleeve Nut 733440495
Couldn't load pickup availability
Metric Bite Sleeve 725326985
Couldn't load pickup availability
Universal Internal Thread Repair 1-1/4 to 2-1/8"
Couldn't load pickup availability
Universal External Thread Repair 1-3/8 to 6"
Couldn't load pickup availability
Universal Internal Thread Repair 11/16 to 13/16"
Couldn't load pickup availability
Hex Key, Fractional, Balldriver®, 1/8", 3.8" L
Couldn't load pickup availability
Hex Key, Metric, Balldriver®, 4mm, 110mm Length
Couldn't load pickup availability
Hex Key, Fractional, Stubby, Ball End, 1/4"
Couldn't load pickup availability
Wire Thread Insert Repair Kit 7/8-14
Couldn't load pickup availability
Wire Thread Insert Repair Kit 9/16-12
Couldn't load pickup availability
Wire Thread Insert Repair Kit M5 to M12
Couldn't load pickup availability
Product Description
• Helically-wound thread repair – universally accepted and most cost-effective method of thread repair• Manufactured from precision cold-formed 18-8 (Type 304) stainless steel
• Kits contain tap, inserts, installation tool, tang removal tool (select kits) and instructions, packaged in a sturdy and convenient storage box
• Inserts compensate for pitch and angle errors and share the load over more of the thread for stronger assemblies
• Tensile strength of at least 200,000 PSI
• Wide effective temperature range: –275°F to +774°F (–170°C to +412°C)
Fix-A-Thred® Insert Installation Instructions
Drill to clear out the damaged thread (if necessary).
Thread insert tap supplied. Tap thread should match up with bolt.
Wind insert in with light downward pressure until 1/4 to 1/2 turn below surface, driving tang towards bottom of the hole.
Remove tool and sit back on top of tang. Tap down sharply. Do not try to twist tang off. For large fine threads, use long nose pliers and pull tang out.
To insure proper installation of inserts, always use the correct and corresponding tools.
Technical Specifications
| Item#: | 53852 |
|---|---|
| Type | Insert Repair Kit |
| Size | M18 x 2.5 |
| Recommended Drill Size | 47/64 " |
| Number of Pieces | 8 |
| UNSPSC #: | 27112810 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
