Mounted Flap Wheel 2"
(Pack of
1.0)
• Epoxy center construction holds stem and each flap securely in place
• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog Page#: 3-7
Frequently Bought Together
Slasher 2000 Ceramic Aluminum Oxide Grinding Wheel 4" x 3/16" x 3/8"
Couldn't load pickup availability
Unloader Aluminum Grinding Wheel 4-1/2" x 3/16" x 7/8" Arbor
Couldn't load pickup availability
Silicon Carbide Grain Abrasive Wheel 8"
Couldn't load pickup availability
Broken Bolt Power Extractor 1/4"
Couldn't load pickup availability
Rethreading Die M10 x 1.5
Couldn't load pickup availability
Thin Wall Locking Thread Repair Insert Kit 1/4"
Couldn't load pickup availability
Mounted Flap Wheel 3"
Couldn't load pickup availability
Unmounted Flap Wheel 6"
Couldn't load pickup availability
Flap Band 3-1/2"
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 24mm Washer
Couldn't load pickup availability
Hex Head SEMS Tapping Screw M4.2-1.41
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 17mm Washer Steel
Couldn't load pickup availability
Hex Key, Fractional, Short Arm, 3/4"
Couldn't load pickup availability
Hex Key, Fractional, Long Arm, 3/32"
Couldn't load pickup availability
Hex Key, Fractional, Short Arm, 3/32"
Couldn't load pickup availability
Product Description
• Epoxy center construction holds stem and each flap securely in place• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 83834 |
|---|---|
| Type | Flap Wheels |
| Diameter | 2 " |
| Width | 1 " |
| Arbor Size | 1/4 " |
| Grit | 80 |
| Maximum RPM | 25,000 RPM |
| Grain | Aluminum Oxide |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191507 |
| TAA Compliant: | No |
| Weight: | 0.14 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
