Mounted Flap Wheel 3"
(Pack of
6.0)
• Epoxy center construction holds stem and each flap securely in place
• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Premium Grinding Wheel 7"
Couldn't load pickup availability
Premium Grinding Wheel 9"
Couldn't load pickup availability
Masonry Grinding Wheel 9"
Couldn't load pickup availability
Thin Wall Locking Thread Repair Insert Kit 10-24
Couldn't load pickup availability
HD Locking Thread Insert Kit 5/16-20 to 1/2-20
Couldn't load pickup availability
Damaged Screw Remover Extractor #2
Couldn't load pickup availability
Mounted Mini Flap Wheel 3/8"
Couldn't load pickup availability
Mounted Flap Wheel 2"
Couldn't load pickup availability
1" Dia. X 1" Wide, Flap Wheel, 60 Grit, 1/4" Shank
Couldn't load pickup availability
Air Inlet Grille/Bumper Fascia Push-Type Retainer
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
1/4" Shank 6 Piece Router Trimmer Tool Set
Couldn't load pickup availability
HD Locking Thread Insert Kit 5/16-18 to 1/2-13
Couldn't load pickup availability
Thin Wall Locking Thread Repair Insert Kit 10-32
Couldn't load pickup availability
Product Description
• Epoxy center construction holds stem and each flap securely in place• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 92021M06 |
|---|---|
| Type | Flap Wheels |
| Diameter | 3 " |
| Width | 1 " |
| Arbor Size | 1/4 " |
| Grit | 60 |
| Maximum RPM | 20,000 RPM |
| Grain | Aluminum Oxide |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191509 |
| TAA Compliant: | No |
| Weight: | 1.37 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
