Security Anchor Steel 3/8 x 3-1/2"
(Pack of
10.0)
• Resistant to tampering and vibration
• Reversible nut for round head or flat head style
• Carbon steel anchor body and nut with hardened setting pin
• High pull-out and shear strength
• Made in USA
• For use in all poured concrete and brick materials
• Applications: Security door frames, motion detectors, lock boxes, money meters, fencing, vending machines, burglar bars, benches, light fixtures, playground equipment, cash machines, stadium seating, mailboxes, prison furniture
1. Drill hole of sufficient depth, using same diameter bit as anchor being installed.
2. Select head style (round or flat), then turn security nut flush with the top of anchor. Insert anchor into pre-drilled hole.
3. Drive in setting pin with hammer until flush. Use a 2 to 3 lb. hammer for small anchors and a 4 to 5 lb. hammer for medium and large anchors.
4. Slotted anchor base expands into concrete. Anchor is now properly set.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Masonry Anchor TORX® Head Steel 1/4 x 6"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 5/8 x 2-1/4"
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 5/8 x 6"
Couldn't load pickup availability
Expansion Shield Anchor Alloy Steel 1/4"
Couldn't load pickup availability
Double Expansion Shield Anchor Alloy Steel 1/4"
Couldn't load pickup availability
Pin Drive Expansion Anchor Steel 1/2 x 3-1/2"
Couldn't load pickup availability
Self-Drilling Screw Assortment Hex Head 650 Pcs
Couldn't load pickup availability
DIN 6325/M6 Dowel Pin Assortment 175Pcs
Couldn't load pickup availability
Self-Drilling Screw Assortment Hex Head 600Pcs
Couldn't load pickup availability
Electrical Box 230 V U.S. Version T
Couldn't load pickup availability
Heater Plug Receptacle
Couldn't load pickup availability
Torrent Push
Couldn't load pickup availability
Product Description
• Resistant to tampering and vibration• Reversible nut for round head or flat head style
• Carbon steel anchor body and nut with hardened setting pin
• High pull-out and shear strength
• Made in USA
• For use in all poured concrete and brick materials
• Applications: Security door frames, motion detectors, lock boxes, money meters, fencing, vending machines, burglar bars, benches, light fixtures, playground equipment, cash machines, stadium seating, mailboxes, prison furniture
1. Drill hole of sufficient depth, using same diameter bit as anchor being installed.
2. Select head style (round or flat), then turn security nut flush with the top of anchor. Insert anchor into pre-drilled hole.
3. Drive in setting pin with hammer until flush. Use a 2 to 3 lb. hammer for small anchors and a 4 to 5 lb. hammer for medium and large anchors.
4. Slotted anchor base expands into concrete. Anchor is now properly set.
Technical Specifications
| Item#: | 59630 |
|---|---|
| Anchor Size | 3/8 " |
| Length | 3-1/2 " |
| Type | Security Anchor |
| Material | Carbon Steel |
| Finish | Zinc |
| Size | 3/8X3-1/2 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
