Mounted Flap Wheel 3"
(Pack of
1.0)
• Epoxy center construction holds stem and each flap securely in place
• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog Page#: 3-7
Frequently Bought Together
Unloader Aluminum Grinding Wheel 4-1/2" x 1/4" x 5/8-11" Arbor Bulk
Couldn't load pickup availability
Premium Grinding Wheel Kit 4-1/2"
Couldn't load pickup availability
Unitized Mounted Point 1/2"
Couldn't load pickup availability
Double End Drill Bit 1/8"
Couldn't load pickup availability
CryoBit Twin Bit 1/8" dia. 135o Split Point, Stubby Length, No Flats
Couldn't load pickup availability
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 24 TPI
Couldn't load pickup availability
Flap Wheel 2-1/2"
Couldn't load pickup availability
Mounted Flap Wheel 3"
Couldn't load pickup availability
3/4" Dia. X 3/8" Wide, Flap Wheel 120 Grit 1/8" Shank
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 32 TPI
Couldn't load pickup availability
Double End Drill Bit 1/8"
Couldn't load pickup availability
CryoBit Twin Bit 1/8" dia. 135o Split Point, Stubby Length, No Flats
Couldn't load pickup availability
Product Description
• Epoxy center construction holds stem and each flap securely in place• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 92021 |
|---|---|
| Type | Flap Wheels |
| Diameter | 3 " |
| Width | 1 " |
| Arbor Size | 1/4 " |
| Grit | 60 |
| Maximum RPM | 20,000 RPM |
| Grain | Aluminum Oxide |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191507 |
| TAA Compliant: | No |
| Weight: | 0.24 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
