Counterbore Screw 5/8-11 x 3"
(Pack of
10.0)
• Countr-Bor Screws generate higher clamp loads because they are torqued through an external drive (socket); standard hex socket head screws are torqued by an internal drive (hex key)
• Heat-treated alloy steel
• Class 3A UNC threads
• Tensile strength: 180,000 PSI (up to and including 1/2" dia.); 170,000 PSI (over 1/2" dia.)
• ANSI Specification B1.1
• All dimensional properties meet IFI-115 and SAE J58 specifications
• Lawson Countr-Bor Screws can replace any standard hex socket head screw
• 12-point screw fits into same counter-bore hole – use standard 12 point socket
NOTE: Use a wrench or socket size which corresponds to the diameter of the screw. For example, a 5/16" dia. screw is installed by using a 5/16", 12 point standard socket.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Hex Cap Screw Assortment Grade 10.9 M6-M20
Couldn't load pickup availability
Hex Cap Screw Assortment Grade 10.9 M6-M12
Couldn't load pickup availability
Hex Cap Screw Assortment Grade 10.9 M6-M12
Couldn't load pickup availability
Reclosable Fastener Assortment 4Pcs
Couldn't load pickup availability
Snap Fastener Cap for 97153 Socket
Couldn't load pickup availability
Turn Fastener Stud with #7 Screw
Couldn't load pickup availability
Hex Flange Locking Screw Grade 5 1/2-13 x 2"
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.5 x 70mm
Couldn't load pickup availability
Hex Flange Bolt Grade 8 1/2-13 x 2-3/4"
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability
Product Description
• Countr-Bor Screws generate higher clamp loads because they are torqued through an external drive (socket); standard hex socket head screws are torqued by an internal drive (hex key)• Heat-treated alloy steel
• Class 3A UNC threads
• Tensile strength: 180,000 PSI (up to and including 1/2" dia.); 170,000 PSI (over 1/2" dia.)
• ANSI Specification B1.1
• All dimensional properties meet IFI-115 and SAE J58 specifications
• Lawson Countr-Bor Screws can replace any standard hex socket head screw
• 12-point screw fits into same counter-bore hole – use standard 12 point socket
NOTE: Use a wrench or socket size which corresponds to the diameter of the screw. For example, a 5/16" dia. screw is installed by using a 5/16", 12 point standard socket.
Technical Specifications
| Item#: | 85329 |
|---|---|
| Type | Counter-Bor |
| Diameter | 5/8 " |
| Thread Pitch | 11 |
| Thread | Coarse |
| Length | 3 " |
| Finish | Plain |
| Material | Alloy Steel |
| Head Style | 12-Point Flange |
| Size | 5/8X3 " |
| Specifications | IFI-115 |
| Tensile Strength | 170,000 PSI |
| UNSPSC #: | 31161620 |
| TAA Compliant: | No |
| Weight: | 2.96 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
