Counterbore Screw 5/16-18 x 5/8"
(Pack of
50.0)
• Countr-Bor Screws generate higher clamp loads because they are torqued through an external drive (socket); standard hex socket head screws are torqued by an internal drive (hex key)
• Heat-treated alloy steel
• Class 3A UNC threads
• Tensile strength: 180,000 PSI (up to and including 1/2" dia.); 170,000 PSI (over 1/2" dia.)
• ANSI Specification B1.1
• All dimensional properties meet IFI-115 and SAE J58 specifications
• Lawson Countr-Bor Screws can replace any standard hex socket head screw
• 12-point screw fits into same counter-bore hole – use standard 12 point socket
NOTE: Use a wrench or socket size which corresponds to the diameter of the screw. For example, a 5/16" dia. screw is installed by using a 5/16", 12 point standard socket.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Hex Cap Screw Assortment Grade 9 1/4 to 7/16"
Couldn't load pickup availability
Hex Cap Screw Assortment Grade 8 1/4 to 3/4"
Couldn't load pickup availability
Hex Cap Screw Assortment Grade 9 1/4 to 1/2"
Couldn't load pickup availability
Keystock Assortment Square 303 SS 31Pcs
Couldn't load pickup availability
Tamper-Proof Screw Assortment Torx Drive 305Pcs
Couldn't load pickup availability
Metric Keystock Assortment Square 31Pcs
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M12-1.75 x 50mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 45mm
Couldn't load pickup availability
Hex Flange Locking Screw Grade 5 7/16-14 x 1-1/2"
Couldn't load pickup availability
Grille Clip Steel Zinc
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Drive Rivet Nylon M8
Couldn't load pickup availability
Product Description
• Countr-Bor Screws generate higher clamp loads because they are torqued through an external drive (socket); standard hex socket head screws are torqued by an internal drive (hex key)• Heat-treated alloy steel
• Class 3A UNC threads
• Tensile strength: 180,000 PSI (up to and including 1/2" dia.); 170,000 PSI (over 1/2" dia.)
• ANSI Specification B1.1
• All dimensional properties meet IFI-115 and SAE J58 specifications
• Lawson Countr-Bor Screws can replace any standard hex socket head screw
• 12-point screw fits into same counter-bore hole – use standard 12 point socket
NOTE: Use a wrench or socket size which corresponds to the diameter of the screw. For example, a 5/16" dia. screw is installed by using a 5/16", 12 point standard socket.
Technical Specifications
| Item#: | 85285 |
|---|---|
| Type | Counter-Bor |
| Diameter | 5/16 " |
| Thread Pitch | 18 |
| Thread | Coarse |
| Length | 5/8 " |
| Finish | Plain |
| Material | Alloy Steel |
| Head Style | 12-Point Flange |
| Size | 5/16X5/8 " |
| Specifications | IFI-115 |
| Tensile Strength | 180,000 PSI |
| UNSPSC #: | 31161620 |
| TAA Compliant: | Yes |
| Weight: | 0.95 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
