Counterbore Screw 1/2-13 x 1"
(Pack of
10.0)
• Countr-Bor Screws generate higher clamp loads because they are torqued through an external drive (socket); standard hex socket head screws are torqued by an internal drive (hex key)
• Heat-treated alloy steel
• Class 3A UNC threads
• Tensile strength: 180,000 PSI (up to and including 1/2" dia.); 170,000 PSI (over 1/2" dia.)
• ANSI Specification B1.1
• All dimensional properties meet IFI-115 and SAE J58 specifications
• Lawson Countr-Bor Screws can replace any standard hex socket head screw
• 12-point screw fits into same counter-bore hole – use standard 12 point socket
NOTE: Use a wrench or socket size which corresponds to the diameter of the screw. For example, a 5/16" dia. screw is installed by using a 5/16", 12 point standard socket.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Hex Cap Screw Assortment Grade 9 1/4 to 1"
Couldn't load pickup availability
Hex Cap Screw Assortment Grade 8 1/4 to 3/4"
Couldn't load pickup availability
Hex Cap Screw Assortment Grade 8 1/4 to 1/2"
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Toggle Bolt Anchor Assortment 70Pcs
Couldn't load pickup availability
Nut and Washer Assortment 240Pcs
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M12-1.75 x 30mm
Couldn't load pickup availability
Hex Flange Locking Screw Grade 5 1/4-20 x 1-1/4"
Couldn't load pickup availability
Hex Flange Locking Screw Grade 5 5/16-18 x 2-1/4"
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Product Description
• Countr-Bor Screws generate higher clamp loads because they are torqued through an external drive (socket); standard hex socket head screws are torqued by an internal drive (hex key)• Heat-treated alloy steel
• Class 3A UNC threads
• Tensile strength: 180,000 PSI (up to and including 1/2" dia.); 170,000 PSI (over 1/2" dia.)
• ANSI Specification B1.1
• All dimensional properties meet IFI-115 and SAE J58 specifications
• Lawson Countr-Bor Screws can replace any standard hex socket head screw
• 12-point screw fits into same counter-bore hole – use standard 12 point socket
NOTE: Use a wrench or socket size which corresponds to the diameter of the screw. For example, a 5/16" dia. screw is installed by using a 5/16", 12 point standard socket.
Technical Specifications
| Item#: | 85313 |
|---|---|
| Type | Counter-Bor |
| Diameter | 1/2 " |
| Thread Pitch | 13 |
| Thread | Coarse |
| Length | 1 " |
| Finish | Plain |
| Material | Alloy Steel |
| Head Style | 12-Point Flange |
| Size | 1/2-13 " |
| Specifications | IFI-115 |
| Tensile Strength | 180,000 PSI |
| UNSPSC #: | 31161620 |
| TAA Compliant: | Yes |
| Weight: | 0.9 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
