Cobalt End Mill 4 Flute Single End 1"
(Pack of
1.0)
• M42 tool steel with an 8% cobalt content for long tool life and high heat and abrasion resistance for tough machining applications
• Made in USA
• TiN coating (Titanium Nitride) is ideal for a wide range of applications and cutting conditions where tool life and higher feeds and speeds are operating objectives
• High lubricity of TiN facilitates chip flow, prevents buildup and reduces cutting forces and temperature
• TiN reduces wear and improves chip formation to extend tool life
• Due to the sinusoidal form on cutting edge, small chips are produced which allow faster feed rates than conventional end mills. A rough finish is produced which will require a finishing pass
• Used in difficult and abrasive materials and tough alloy materials such as stainless steel, nickel base alloy, brass and iron
NOTE: Item Nos. 14859 and 14860 have five flutes.
End Mill Selection: Harder workpieces require a higher number of flutes. Softer material requires fewer flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Extractor Kit
Couldn't load pickup availability
Universal External Thread Repair 11/16 to 1-1/2"
Couldn't load pickup availability
Universal External Thread Repair Kit 3Pcs
Couldn't load pickup availability
Solid Carbide End Mill 2 Flute Single End 3/16"
Couldn't load pickup availability
Solid Carbide End Mill 2 Flute Single End 7/8"
Couldn't load pickup availability
Solid Carbide End Mill 4 Flute Single End 1/2"
Couldn't load pickup availability
Cobalt End Mill 4 Flute Single End 3/8"
Couldn't load pickup availability
Cobalt End Mill 4 Flute Single End 1/4"
Couldn't load pickup availability
Cobalt End Mill 4 Flute Single End 5/8"
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Fender Apron Retainer Plastic 20mm
Couldn't load pickup availability
Pneumatic Cut-Off Tool with Zirconium Cut-Off Wheels
Couldn't load pickup availability
18V 2-Tool Right Angle Grinder and Impact Wrench Kit
Couldn't load pickup availability
18V 2-Tool Impact Driver and Compact Circular Saw Kit
Couldn't load pickup availability
Product Description
• M42 tool steel with an 8% cobalt content for long tool life and high heat and abrasion resistance for tough machining applications• Made in USA
• TiN coating (Titanium Nitride) is ideal for a wide range of applications and cutting conditions where tool life and higher feeds and speeds are operating objectives
• High lubricity of TiN facilitates chip flow, prevents buildup and reduces cutting forces and temperature
• TiN reduces wear and improves chip formation to extend tool life
• Due to the sinusoidal form on cutting edge, small chips are produced which allow faster feed rates than conventional end mills. A rough finish is produced which will require a finishing pass
• Used in difficult and abrasive materials and tough alloy materials such as stainless steel, nickel base alloy, brass and iron
NOTE: Item Nos. 14859 and 14860 have five flutes.
End Mill Selection: Harder workpieces require a higher number of flutes. Softer material requires fewer flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 14860 |
|---|---|
| Material | M42 |
| Finish | TiN |
| Center Cutting | No |
| Cutting Diameter | 1 " |
| Cutting Length | 2 " |
| Flutes | 5 |
| Shank Size | 1 " |
| Overall Length | 4-1/2 " |
| UNSPSC #: | 27112803 |
| TAA Compliant: | Yes |
| Weight: | 0.85 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
