3-3/8" Cobalt Hole Saw, 1-1/2" Cutting Depth
(Pack of
1.0)
High cobalt tool-steel cutting edge is electron beam welded to a thicker, tougher steel wall and backing cap. As a result, these hole saws stand up to abuse and punishment, yet are lighter and easier to use than competitive cutters. Made in USA.
• Positive rake teeth improves chip clearance for cutting softer materials
• Reinforced tooth flank strengthens teeth for cutting hard materials
• Variable pitch teeth reduces vibration and heat
• Expanded gullets deliver faster cuts and longer life
• 1-1/2" depth of cut
• Cuts wood, sheet rock, nail-embedded wood, plastic, machinable metal
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 32 TPI
Couldn't load pickup availability
Double End Drill Bit 1/8"
Couldn't load pickup availability
CryoBit Twin Bit 1/8" dia. 135o Split Point, Stubby Length, No Flats
Couldn't load pickup availability
4-1/8" Cobalt Hole Saw, 1-1/2" Cutting Depth
Couldn't load pickup availability
1-7/8" Cobalt Hole Saw, 1-1/2" Cutting Depth
Couldn't load pickup availability
Bimetal Hole Saw 2-3/4"
Couldn't load pickup availability
Speed Slot Carbide-Tipped Hole Saw 4-1/8"
Couldn't load pickup availability
Bimetal Hole Saw 4-1/4"
Couldn't load pickup availability
Carbide-Tipped Hole Cutter 2-1/2"
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability
Product Description
High cobalt tool-steel cutting edge is electron beam welded to a thicker, tougher steel wall and backing cap. As a result, these hole saws stand up to abuse and punishment, yet are lighter and easier to use than competitive cutters. Made in USA.• Positive rake teeth improves chip clearance for cutting softer materials
• Reinforced tooth flank strengthens teeth for cutting hard materials
• Variable pitch teeth reduces vibration and heat
• Expanded gullets deliver faster cuts and longer life
• 1-1/2" depth of cut
• Cuts wood, sheet rock, nail-embedded wood, plastic, machinable metal
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 1632410 |
|---|---|
| Diameter | 3-3/8 " |
| Depth of Cut | 1-1/2 " |
| Teeth per Inch | Variable Pitch |
| Material | Cobalt |
| Blade Type | Bi-Metal |
| UNSPSC #: | 27112826 |
| TAA Compliant: | No |
| Weight: | 0.595 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
