- No Items in Cart.
Regency® 4-Flute HSS Hand Tap Kit M16 x 2
Regency® - Hand Tap Kit, High Speed Steel, Gold Oxide Finish, 4 Flute, Taper, Plug and Bottoming Taps, M16 x 2, 1-13/16" Thread Length (Pack of 1)
Representative Image Only
- TAA Compliant
Welcome. Register now to see your pricing.
Close
Regency® - Hand Tap Kit, High Speed Steel, Gold Oxide Finish, 4 Flute, Taper, Plug and Bottoming Taps, M16 x 2, 1-13/16" Thread Length (Pack of 1)
Representative Image Only
Lawson Tap Sets include Taper, Plug and Bottoming Style Taps; replacement taps are available in each style.
Taper Style
8 to 10 threads chamfered. For easy thread starting in tough materials.
Plug Style
3 to 5 threads chamfered. For general use when tapping to bottom of hole is not critical.
Bottoming Style
1-1/2 threads chamfered. Use after threads have been started for tapping to bottom of hole.
Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
Gold oxide finish enhances chip flow
Minimizes seizing and binding
Requires less torque
Produces a more accurate hole
Sizes permanently marked on all taps
Manufactured from high-speed steel
Wear-resistant
Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
ITEM# | DESCRIPTION | QTY |
63479 | Regency® Taper Hand Tap, M16 x 2.0 | 1 |
63459 | Regency® Plug Hand Tap, M16 x 2.0 | 1 |
63436 | Regency® Bottoming Hand Tap, M16 x 2.0 | 1 |
Lawson Tap Sets include Taper, Plug and Bottoming Style Taps; replacement taps are available in each style.
Taper Style
8 to 10 threads chamfered. For easy thread starting in tough materials.
Plug Style
3 to 5 threads chamfered. For general use when tapping to bottom of hole is not critical.
Bottoming Style
1-1/2 threads chamfered. Use after threads have been started for tapping to bottom of hole.
Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
Gold oxide finish enhances chip flow
Minimizes seizing and binding
Requires less torque
Produces a more accurate hole
Sizes permanently marked on all taps
Manufactured from high-speed steel
Wear-resistant
Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.